|
New
Products |
|
The Plasticolor 2000 GR
is a single gravimetric feeder. The unit accurately feeds free flowing
color and additives at the throat of extrusion, blow molding and
injection molding machines. The system incorporates
a special algorithm that filters out vibrations and movement from mold
clamping making it suitable for use on injection molding machines.
The
Plasticolor 2000 GR is fully backwards compatible with older Plasticolor
units meaning an easy upgrade. Save $$ by using your existing body
casting, motor and controller. An
integrated venturi loader is included with the system |
 |
| The GRAVIBELT is a
single gravimetric beltfeeder. The unit accurately feeds free flowing
color and additives at the throat of extrusion, blow molding and
injection molding machines. The system incorporates a special algorithm
that filters out vibrations and movement from mold clamping making it
suitable for use on injection molding machines. The Gravibelt offers a
wide
dynamic feed range under one setup.
With a feed rate from 1
oz to 100 lbs/hr for pellets and 0.5 oz to 30 lbs/hr for micro pellets.
Isolated 10/100 Ethernet makes possible the retrieval of production
information. An integrated venturi loader is included with the system |
 |
|
The Plastore Web Enabled Remote Feeder
Control software utility allows users to monitor and interact with
individual feeders or mixing stations via a Windows based PC environment
using the standard Microsoft Internet Explorer web browser as the
primary interface. Feeders may be started and stopped, and motor speeds
may be adjusted on-the-fly to suit changing requirements. Motor RPM and
Feeder Status are displayed in Real-Time as data is passed back to the
web server from PLC controllers via serial or Ethernet communications.
In addition, recipes may be created and stored to define standard
production runs for repeatable manufacturing results |
 |
|
The Plastore Automatic Color Change System provides a simple and
automated means for on-stream transitions between color recipes
utilizing existing feeders and Mixing Stations. The system allows
control and monitoring for two feeders, and provides a touch-screen
interface for easy operator interaction. All interaction with the system
is done using the touch screen interface.
The touch screen senses
capacitance, not pressure, so only a light touch with a finger or stylus
is required. |
 |
| QUICK DRAIN.
Quick drain
will allow you to drain the Plasticolor hopper with minimal material
loss. The Quick drain slidegate assembly fits all Plasticolor 2000 and
3000. |
 |
|
AC motor and Control
Yaskawa V7
AC controller installed in an enclosure that meets NEMA type 4X/12
indoor use requirements. We have paired the V74X AC drive with a custom
designed Groschopp AC gear motor. Existing Plastore feeders can be
easily upgraded to this AC drive system.
|
 |
|
Water cooled sleeve for
temperature sensitive materials.
The water cooled sleeve extends through the material
stream and drops the additive in the center of the main material. The
mixing takes place directly in the center of the neckpiece. By
dropping the additive in the center of the neckpiece, our unit prevents
the additive from adhering to the sides of the neckpiece. This
configuration simplifies cleanout and additive changes.
|
 |
|
Dowload the latest
New Products at
Plastore.pdf |
|
